![[ Back to EurekAlert! ]](http://www.eurekalert.org/images/back2e.gif){kind=small}
Public release date: 2-May-2013[ | E-mail |
Share ] Contact: Angela Stark
astark@osa.org
202-416-1443
The Optical Society
First portable, real-time detector uses laser-based light scattering technique to identify harmful fibers
WASHINGTON, May 2, 2013Asbestos was once called a miracle material because of its toughness and fire-resistant properties. It was used as insulation, incorporated into cement and even woven into firemen's protective clothing. Over time, however, scientists pinned the cause of lung cancers such as mesothelioma on asbestos fiber inhalation. Asbestos was banned in the many industrialized countries in the 1980s, but the threat lingers on in the ceilings, walls and floors of old buildings and homes. Now a team of researchers from the University of Hertfordshire in the U.K. has developed and tested the first portable, real-time airborne asbestos detector. They hope that the prototype, described in a paper published today in the Optical Society's (OSA) open-access journal Optics Express, will be commercialized in the U.K. in the next few years, providing roofers, plumbers, electricians and other workers in commercial and residential buildings with an affordable way to quickly identify if they have inadvertently disturbed asbestos fibers into the air.
"Many thousands of people around the world have died from asbestos fiber inhalation," says Paul Kaye, a member of the team that developed the new detection method at the University of Hertfordshire's School of Physics, Astronomy and Mathematics. "Even today, long after asbestos use was banned in most Western countries, there are many people who become exposed to asbestos that was used in buildings decades earlier, and these people too are dying from that exposure."
Currently, the most common way to identify hazardous airborne asbestos at worksites is to filter the air, count the number of fibers that are caught, and later analyze the fibers with X-ray technology to determine if they are asbestos. The approach requires expensive lab work and hours of wait time. An alternative method to evaluate work site safety is to use a real-time fiber detector, but the current, commercially available detectors are unable to distinguish between asbestos and other less dangerous fibers such as mineral wool, gypsum and glass. The University of Hertfordshire team's new detection method, in contrast, can identify asbestos on-site. It does so by employing a laser-based technique that takes advantage of a unique magnetic property of the mineral.
When exposed to a magnetic field, asbestos fibers orient themselves to align with the field. The property is virtually unique among fibrous materials. "Asbestos has a complex crystalline structure containing several metals including silicon, magnesium and iron. It is thought that it is the iron atoms that give rise to the magnetic properties, but the exact mechanism is still somewhat unclear," says Kaye. Kaye notes that his team wasn't the first to try to exploit the magnetic effect to develop an asbestos detector. "Pioneering U.S.-based scientist Pedro Lilienfeld filed a patent on a related approach in 1988, but it seems it was not taken forward, possibly because of technical difficulties," he says.
The Hertfordshire team's new detection method, developed under the European Commission FP7 project 'ALERT' (FP7-SME-2008-2), works by first shining a laser beam at a stream of airborne particles. When light bounces off the particles, it scatters to form unique, complex patterns. The pattern "is a bit like a thumbprint for the particle," says Kaye, sometimes making it possible to identify a particle's shape, size, structure, and orientation by looking at the scattered light. "We can use this technique of light scattering to detect single airborne fibers that are far too small to be seen with the naked eye," he says. After identifying the fibers, the detector carries them in an airflow through a magnetic field, and uses light scattering again on the other side to tell if the fibers have aligned with the field. "If they have, they are highly likely to be asbestos," Kaye says.
The team has tested their detector in the lab and has worked with colleagues in the U.K. and Spain to develop prototypes that are now undergoing field trials at various locations where asbestos removal operations are underway. "Our colleagues estimate that it will take 12 to 18 months to get the first production units for sale, with a target price of perhaps 700-800 U.S. dollars," Kaye says. As production increases after the initial product launch, Kaye hopes that costs may be cut even further, making the detectors even more affordable for an individual plumber, electrician or building renovator. "These tradespeople are the most frequently affected by asbestos-related diseases and most who get the diseases will die from them," Kaye says. The team hopes that, over time, the new detector will help to reduce the 100,000 annual death toll that the World Health Organization attributes to occupational exposure to airborne asbestos.
###
Paper: "Real-time detection of airborne asbestos by light scattering from magnetically re-aligned fibers," C. Stopford et al., Optics Express, Vol. 21, Issue 9, pp. 11356-11367 (2013) (link: http://www.opticsinfobase.org/oe/abstract.cfm?uri=oe-21-9-11356).
EDITOR'S NOTE: Images are available to members of the media upon request. Contact Angela Stark, astark@osa.org.
About Optics Express
Optics Express reports on new developments in all fields of optical science and technology every two weeks. The journal provides rapid publication of original, peer-reviewed papers. It is published by the Optical Society and edited by Andrew M. Weiner of Purdue University. Optics Express is an open-access journal and is available at no cost to readers online at http://www.OpticsInfoBase.org/OE.
About OSA
Uniting more than 180,000 professionals from 175 countries, the Optical Society (OSA) brings together the global optics community through its programs and initiatives. Since 1916 OSA has worked to advance the common interests of the field, providing educational resources to the scientists, engineers and business leaders who work in the field by promoting the science of light and the advanced technologies made possible by optics and photonics. OSA publications, events, technical groups and programs foster optics knowledge and scientific collaboration among all those with an interest in optics and photonics. For more information, visit http://www.osa.org.
[ | E-mail | Share ] ?
AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert! system.
Public release date: 2-May-2013[ | E-mail |
Share ] Contact: Angela Stark
astark@osa.org
202-416-1443
The Optical Society
First portable, real-time detector uses laser-based light scattering technique to identify harmful fibers
WASHINGTON, May 2, 2013Asbestos was once called a miracle material because of its toughness and fire-resistant properties. It was used as insulation, incorporated into cement and even woven into firemen's protective clothing. Over time, however, scientists pinned the cause of lung cancers such as mesothelioma on asbestos fiber inhalation. Asbestos was banned in the many industrialized countries in the 1980s, but the threat lingers on in the ceilings, walls and floors of old buildings and homes. Now a team of researchers from the University of Hertfordshire in the U.K. has developed and tested the first portable, real-time airborne asbestos detector. They hope that the prototype, described in a paper published today in the Optical Society's (OSA) open-access journal Optics Express, will be commercialized in the U.K. in the next few years, providing roofers, plumbers, electricians and other workers in commercial and residential buildings with an affordable way to quickly identify if they have inadvertently disturbed asbestos fibers into the air.
"Many thousands of people around the world have died from asbestos fiber inhalation," says Paul Kaye, a member of the team that developed the new detection method at the University of Hertfordshire's School of Physics, Astronomy and Mathematics. "Even today, long after asbestos use was banned in most Western countries, there are many people who become exposed to asbestos that was used in buildings decades earlier, and these people too are dying from that exposure."
Currently, the most common way to identify hazardous airborne asbestos at worksites is to filter the air, count the number of fibers that are caught, and later analyze the fibers with X-ray technology to determine if they are asbestos. The approach requires expensive lab work and hours of wait time. An alternative method to evaluate work site safety is to use a real-time fiber detector, but the current, commercially available detectors are unable to distinguish between asbestos and other less dangerous fibers such as mineral wool, gypsum and glass. The University of Hertfordshire team's new detection method, in contrast, can identify asbestos on-site. It does so by employing a laser-based technique that takes advantage of a unique magnetic property of the mineral.
When exposed to a magnetic field, asbestos fibers orient themselves to align with the field. The property is virtually unique among fibrous materials. "Asbestos has a complex crystalline structure containing several metals including silicon, magnesium and iron. It is thought that it is the iron atoms that give rise to the magnetic properties, but the exact mechanism is still somewhat unclear," says Kaye. Kaye notes that his team wasn't the first to try to exploit the magnetic effect to develop an asbestos detector. "Pioneering U.S.-based scientist Pedro Lilienfeld filed a patent on a related approach in 1988, but it seems it was not taken forward, possibly because of technical difficulties," he says.
The Hertfordshire team's new detection method, developed under the European Commission FP7 project 'ALERT' (FP7-SME-2008-2), works by first shining a laser beam at a stream of airborne particles. When light bounces off the particles, it scatters to form unique, complex patterns. The pattern "is a bit like a thumbprint for the particle," says Kaye, sometimes making it possible to identify a particle's shape, size, structure, and orientation by looking at the scattered light. "We can use this technique of light scattering to detect single airborne fibers that are far too small to be seen with the naked eye," he says. After identifying the fibers, the detector carries them in an airflow through a magnetic field, and uses light scattering again on the other side to tell if the fibers have aligned with the field. "If they have, they are highly likely to be asbestos," Kaye says.
The team has tested their detector in the lab and has worked with colleagues in the U.K. and Spain to develop prototypes that are now undergoing field trials at various locations where asbestos removal operations are underway. "Our colleagues estimate that it will take 12 to 18 months to get the first production units for sale, with a target price of perhaps 700-800 U.S. dollars," Kaye says. As production increases after the initial product launch, Kaye hopes that costs may be cut even further, making the detectors even more affordable for an individual plumber, electrician or building renovator. "These tradespeople are the most frequently affected by asbestos-related diseases and most who get the diseases will die from them," Kaye says. The team hopes that, over time, the new detector will help to reduce the 100,000 annual death toll that the World Health Organization attributes to occupational exposure to airborne asbestos.
###
Paper: "Real-time detection of airborne asbestos by light scattering from magnetically re-aligned fibers," C. Stopford et al., Optics Express, Vol. 21, Issue 9, pp. 11356-11367 (2013) (link: http://www.opticsinfobase.org/oe/abstract.cfm?uri=oe-21-9-11356).
EDITOR'S NOTE: Images are available to members of the media upon request. Contact Angela Stark, astark@osa.org.
About Optics Express
Optics Express reports on new developments in all fields of optical science and technology every two weeks. The journal provides rapid publication of original, peer-reviewed papers. It is published by the Optical Society and edited by Andrew M. Weiner of Purdue University. Optics Express is an open-access journal and is available at no cost to readers online at http://www.OpticsInfoBase.org/OE.
About OSA
Uniting more than 180,000 professionals from 175 countries, the Optical Society (OSA) brings together the global optics community through its programs and initiatives. Since 1916 OSA has worked to advance the common interests of the field, providing educational resources to the scientists, engineers and business leaders who work in the field by promoting the science of light and the advanced technologies made possible by optics and photonics. OSA publications, events, technical groups and programs foster optics knowledge and scientific collaboration among all those with an interest in optics and photonics. For more information, visit http://www.osa.org.
[ | E-mail | Share ] ?
AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert! system.
Source: http://www.eurekalert.org/pub_releases/2013-05/tos-oad050213.php
Super Bowl 2013 Commercials Evasi0n Superdome Iron Man 3 Trailer Super Bowl 2013 Ray Rice sodastream
Comments are filtered for language and registration is required. The Times makes no guarantee of comments' factual accuracy. Readers may report inappropriate comments by clicking the Report Abuse link next to a comment. Here are the full legal terms you agree to by using this comment form. ';
shareDiv.innerHTML = templateHTML;
/* append the new div to the end of the document, which is hidden already with CSS */
document.body.appendChild(shareDiv);
/* Store the div in both a regular JavaScript variable and as a jQuery object so we can reference them faster later */
var shareTip = document.getElementById('shareTip'),
$shareTip = $('#shareTip');
/* This extends our settings object with any user-defined settings passed to the function and returns the jQuery object shareTip
was called on */
return this.each(function() {
if (options) {
$.extend(settings, options);
}
/* This is a hack to make sure the shareTip always fades back to 100% opacity */
var checkOpacity = function (){
if ( $shareTip.css('opacity') !== 1 ){
$shareTip.css({'opacity': 1});
}
};
/* Function that replaces the HTML in the shareTip with the template we defined at the top */
/* It will wipe/reset the links on the social media buttons each time the function is called */
var removeLinks = function (){
shareTip.innerHTML = templateHTML;
};
/* This is the function that makes the links for the Tweet / Share functionality */
var makeURLS = function (link, message){
/* Here we construct the Tweet URL using an array, with values passed to the function */
var tweetConstruct = [
'http://twitter.com/share?url=', link, '&text=', message, '&via=', settings.twitter_account
],
/* Then join the array into one chunk of HTML */
tweetURL = tweetConstruct.join(''),
/* Same story for Facebook */
fbConstruct = [
'http://www.facebook.com/sharer.php?u=', link, '&src=sp'
],
fbURL = fbConstruct.join(''),
newHTML = [
'' ], shareHTML = newHTML.join(''); /* Load in our new HTML */ shareTip.innerHTML = shareHTML; }; /* Since the shareTip will automatically fade out when the user mouses out of an element */ /* we have to specifically tell the shareTip we want it to stay put when the user mouses over it */ /* This effectively gives the user a 500 ms (or whatever) window to mouse */ /* from the element to the shareTip to prevent it from popping out */ $shareTip.hover(function(){ $shareTip.stop(true, true); $shareTip.show(); checkOpacity(); }, function(){ $(this).fadeOut(settings.speed); }); /* This function handles the hover action */ $(this).hover(function(){ /* remove the old links, so someone doesn't accidentally click on them */ removeLinks(); /* If there's already an animation running on the shareTip, stop it */ $shareTip.stop(true, true); var eso = $(this), message, /* Store the width and height of the shareTip and the offset of the element for our calculations */ height = eso.height(), width = eso.width(), offset = eso.offset(), link; link = eso.children('a').attr('href'); message = escape( eso.find('img').attr('alt') ) || eso.attr(settings.message_attr); if (link.search('http://') === -1){ link = 'http://www.latimes.com' + link; } link = encodeURIComponent(link); /* If it's at the top of the page, the shareTip will pop under the element */ if (offset.top